OMNIO - Universal dimmer 1-channel UPD230/10

Presentation

The Omnio multi universal cable dimmer 1-channel KD230/10 is a device for dimming LED luminaires and other electrical loads. Thanks to automatic load recognition (R/L/C) the dimmer selects the right operating mode as well as the ideal dimming curve for the connected light source. Up to 50 Omnio radio transmitters can be programmed. Each transmitter can be assigned a function, for example dim with rocker, dim with push-button, staircase light, predefined dim value, step-switch (AW20), timer (AW23/24/25), soft on/off, programmable scenes or presence simulation.

Non-dimmable loads are automatically switched at zero crossing. Bidirectional communication, EEP D2-01-03, ARCO ready (AWAG Remote Commissioning). In addition this actuator can be used as repeater in case of range issues. Suitable for flush mounted sockets.

The Omnio actuators (receivers) are controlled by radio signals coming from the Omnio transmitters. Each transmitter is able to control an unlimited amount of actuators. The radio transmitter can be manually programmed and deprogrammed to an actuator by following a simple procedure. Via actuator each transmitter can be given a certain function and different parameters.

With ARCO technology, all Omnio actuators can be configured completely by radio without manual access to the device. The powerful software E-Tool constitutes the key component for convenient planning, configuring and documenting projects of any size right at your desk. 

Functions

• Dim with rocker-switch / push-button 
• Staircase light function 
• Step switch (AW20) 
• Timer (AW23/24/25) 
• Soft on/off 
• Programmable scenes 
• Presence simulation 
• Repeater function 
• ARCO ready (AWAG Remote Commissioning)

brief instruction

• Attach dimmer to power socket and attach load 
• Turn the rotary switch HEX to 0 
• Press LRN 2 seconds 
• Press handheld or wall mounted transmitter twice and keep it close to the actuator. CLR lights up for a second, after that the transmitter is programmed 
• Program further transmitters 
• To finish press CLR 
   

features

• Optimised for LED luminaires 
• Dim range 0.5…100 % 
• Dim load 4…300 VA 
• Automatic load detection RLC
   

technical specifications

• Voltage supply :  230 V~ 50 Hz
• Standby power consumption : 0.6 W
• Hardware protection (automatic circuit breaker / fuse) : 13 A
• Power output : MOSFET not potential free
• Rated current : 0.5 A / 230 V~
• Resistive load (incandescent lamps) : 300 W
• Inductive load (cosφ >= 0.8) : 200 VA
• Halogen lamps 230 V~ :  200 W
• Minimum load : 4 W
• Dim range : 0.5 … 100 %
• Plugs : CH
• Protection class : IP20 
• Overvoltage protection : ✓
• Permanent short circuit proof (control unit) : ✓ 
• Automatic load detection : ✓
• Technology : EnOcean 868 MHz
• Radio module : EnOcean TCM320  bidirectional
• EnOcean Equipment Profile (EEP) : D2-01-03
• Environment : -20 … +40 °C / 5 ... 90 % rH non condensing
• Housing : Lexan, ø 51 x 25 mm
• Weight : 45 g
• EC-Directives : 2006/95/EC, 2004/108/EC
• Standards : EN 60669-1/-2-1/-2-2, EN 61000-3-2/-3-3, EN 62493