Reconditioned - FIBARO - Relay Module 1 charge Z-Wave FGS-213 (FIBARO Single Switch 2)

Controlled return

The Micromodule Z-wave Plus 1 FIBARO charge

FIBARO's Single Switch 2 was designed to turn electrical devices on and off. Thanks to its small size, it can be installed in bypass boxes or recess boxes. The module is controlled either by the Z-Wave network or a simple switch. The power and energy measurement feature allows you to monitor and reduce your electricity bills. Connect your Single Switch 2 FIBARO to your Z-Wave system and other devices to take advantage of almost endless possibilities!

Practical Borniers - easy installation

The Single Switch 2 is equipped with thicker bounds to connect wires of a higher diameter and simplify the installation process.

Friendly configuration menu

The built-in RGB diode is a valuable help during the installation process. The light will show if the Single Switch 2 has been added or removed from the network. You can also see if a calibration or update has been successful.

Z-wave network coverage tester

Use the Single Switch 2 FIBARO to check the signal quality in the Z-Wave network. The built-in RGB diode will help you check if the location you have selected for the installation is suitable.

A stronger signal

The Fibaro Single Switch 2 has an increased signal range that gives you more installation possibilities and wider network coverage.

Software updates

You can update your FIBARO Single Switch 2 software to the latest version, once it becomes available. This way, you have access to the latest features without having to replace your module.

Easy to install

Simply place the module in the recess box and connect it to an existing installation. The miniature size of the module allows you to place it in many convenient locations.

Scene management

Even the most complex actions can be activated by a wall switch connected to a module. With the touch of a button when entering a room, it's as natural as turning on the lights. 1 to 3 supports and extended support can be assigned to four different actions

Smart Notifications

The Single Switch 2 FIBARO incorporates many safety measures that protect it from voltage drop, overheating or overload. In the case of any of these events, the system will immediately send you a notification.

Notification on unused devices

The Single Switch 2 FIBARO lets you monitor electrical devices that are currently inactive. The system will notify you if you leave a device in operation and will allow you to turn it off remotely.

Automatic cutting of the water supply

A Flood Sensor in conjunction with an electrovan and Single Switch 2 will protect your home from flooding, providing the highest possible level of efficiency.

Device use and monitoring limits

This feature allows you to set the upper and lower thresholds for energy consumption. Once the limit is exceeded, the module can automatically notify or disable the device.

Measuring power and energy

The new Single Switch 2 lets you measure the power and energy of the connected charge. You can see how much energy is used in your home with clear graphics and use this information to reduce your electricity bills.

Your mobile device is your remote control

You can control modules and receive information through your personal computers and mobile devices. The Single Switch 2 does not require expensive control panels to operate.

Take care of your children

Are you a parent or are you planning to become one in the near future? Track your children's homework and play time, so you might be interested in the ability to automatically activate their favorite media devices.

Protection assistance

Surround your children with the best care. The Single Switch 2 lets you turn off power to appliances when they're not in use.

Your home is wherever you are

The Single Switch 2 module, like the entire FIBAROsystem, can be controlled from anywhere on earth. All you need is an Internet connection.

To sum up

The Z-Wave 500 series chip and Z-Wave Plus protocol offer capabilities that were not previously available. The power and energy measurement feature allows you to optimize your electricity bills. By making use of the scene activation mechanism, you can adapt your home to your preferences.

Careful:

• This module requires neutral
• The output is not free of potential. It therefore does not allow to control a dry contact or a charge with a power voltage other than the entrance.

Features

• Control remote lighting/camera
• Settles behind an existing switch
• On/OFF function
• Incorporates the Z-Wave 500 series chip
• 250% faster communication compared to standard Z-Wave devices
• Built-in scene activation mechanism
• Security communication and notification classes
• Configuration menu with a diode
• Measuring the energy and power of connected devices
• Supports secure mode (Z-Wave network security) encrypted with AES-128 encoding
• Built-in Z-Wave Network Coverage Tester
• OTA software update (depends on controller)
• Larger borniers to facilitate wiring
• Rounded shape to meet the highest standards
• Back-and-forth use
• Use instead of a switchboard
• Small, discreet and aesthetically pleasing
• Easy to use and install

Technical Features

• Module Type: Z-Wave Receiver
• Food: 100 - 240V, 50/60Hz
• Wiring: 3 wires, neutral required
• Maximum power: 8A (resistive load only)
• Frequency: 868.42 Mhz
• Transmission distance: 50m open field, 40m indoors
• Signal power: 1mW
• Dimensions: 42.5mm x 38.25mm x 20.3mm (L x l x h)
• Operating temperature: 0-35oC
• Standards:
  • EMC 2014/30/EU
  • RED 2014/53/EU
  • RoHS 2011/65/EU
  • LVD 2014/35/EU