Philio - Swiss ON/OFF Z-Wave+ plug with PAN11-CH energy measurement
Philio PAN11-CH - A Z-wave+ ON/OFF socket with Swiss fromat to control all your Z-wave equipment. Has power consumption tracking.
A Z-wave+ plug in Swiss format to control your equipment remotely
The PAN11 Philio jack is a switch that allows you to control lighting or any other device via Z-Wave controls. It is designed to work with any type of load of maximum power 2500W.
It can be controlled by a remote control, PC software, or any Z-Wave controller on your network.
In addition to the switching function, this module can also measure the power consumption of the connected charge. The values of instantaneous consumption (in W) and total power consumption (in kWh), voltage and ampèrage can be consulted.
This Z-Wave GEN5 module also works as a wireless repeater with the other modules, to ensure total coverage of your home. It supports air update (OTA) and has overload protection.
duties
- Control a lamp or device remotely
- Z-wave+ plug available in Swiss format
- Integrates directly between an electrical outlet and the charge to be ordered
- ON/OFF function to drive lamps or devices (no variation)
- Measurement of instantaneous and cumulative consumption
- Local load control via the built-in button
- Built-in status LED on the button
- Overload protection
- Security of radio communication via AES-128 encryption
- Integrates the Z-Wave 500 series chip
- 250% faster communication compared to standard Z-Wave devices
- Over The Air (OTA) firmware updates
- Z-Wave message repeater
- Ease of use and installation
Technical Specifications
- Module type: Z-Wave receiver
- Power supply: 230VAC, 50/60Hz
- Plug type J (Switzerland)
- Consumption: 1W
- Maximum load: 2300W
- Frequency: 868.42 Mhz
- Transmission distance: 150m in free field
- Energy measurement:
- Min. Reading: 0.001w
- Resolution: 0.001w
- precision:
- Accuracy: Linear
- Dimensions: 94.5 x 58 x 56mm (75 with socket)
- Operating temperature: 0°C to 40°C
- Certifications: FCC, UL, CE, ROHS
- Use
- Energy Use Monitoring
Fixture Control
Lighting Control - Type
- Plug
- Function
- Actuator
Electricity Consumption - Gateway compatibility
- Fibaro Home Center - total compatibility
Homey - total compatibility
Somfy Tahoma - compatible via optional adapter
eedomus+ - total compatibility - Protocol
- Z-Wave Serie 500
Customers who bought this product also bought:
FIBARO - Z-Wave+ FGMS-001-zw5 multifunction motion sensor (FIBARO Motion Sensor)
Tip top !
Fonctionne très bien avec HC2 et HC3.
Manuel très complet avec le détails des paramètres possibles
Easy to use
Plug' n' play avec Home Assisstant. Répond parfaitement à mes attentes.
Le produit fonctionne très bien
Aucune problème rencontré avec ce produit. Il a été intégré directement pour ma box domotique (Jeedom) et fonctionne sans problèmes.
A recommander
Almost good
Well supported by HC3 but I have an issue with period measurements sending which isn't working as expected. I had to start polling the device to get regular data. Otherwise, pretty good.
Top
Comme toujours, ces prises sont au top. Zéro soucis. J’en possède plusieurs. Je recommande