LED Controller compatible with WLED and Home Assistant SLWF-03
The A1-SLWF-03 controller by SMLIGHT is the smallest and most powerful WLED + soundReactive WLED controller for addressable LED strips like WS2812B. It can be controlled via WiFi, through an IR remote control, or via the button of a sensor.
Easy to use - simply plug in the Type-C cable (supporting PD) and the addressable LED strip (like WS2812B) and start enjoying hundreds of effects.
Very small and tiny, the smallest WLED controller based on the ESP32 SoC with built-in digital microphone.
It comes pre-flashed and ready to use. The built-in digital microphone * allows for the use of sound-reactive effects. It can be controlled from the web interface (no app required) or via the WLED app (available on the Google Play Store and App Store).
It can also be controlled via an IR remote control (not included) or via a sensor button. Automatic integration with Home Assistant.
Supports over 150 effects, including sound-reactive. All effects are adjustable. Supports 2D effects for WS23812B 16x16 matrices.
Features
- Compact design
- Based on ESP32 SoC for smooth control of many LED lights
- Integrated I2S digital microphone for sound reaction function
- Integrated IR receiver to support IR commands
- Integrated sensor button to control the device through the sensor
- Integrated UART/USB programmer for flashing the device without additional tools or equipment.
- Integrated ESP32 autoboot (autoflash) allows the user to flash the device with a simple "plug-and-flash".
- The user does not need to press buttons, etc.
- Supports 5V, 12V, and 24V strips
- Supports 2 channels for LED strips with the ability to add 6 additional channels through available pinouts.
- Easy connection of LED wires thanks to the screw terminal
- Universal power supply - via Type-C and DC connector or screw terminal
- DIY pinouts allow enthusiasts to enhance the device or add new features.
- Can function as a voice assistant (microphone) for Home Assistant
- Can function as a Bluetooth bridge for Home Assistant with flashed ESPHome firmware - BTProxy
- Fully supports ESPHome firmware.
Technical Specifications
- Product Name: A1-SLWF-03 LED Controller.
- WiFi: 2.4Ghz
- Size: 30*57*23mm.
- Operating Temperature: -15 - +45°C
- Supported Voltage: DC 5-24V
- Waterproofing: IP20
- The rich package includes:
- 1x A1-SLWF-03 LED Controller.
- 2x double-sided adhesive tape.
- 2 screws.
- 1x screwdriver.
- 1x Type-C to Micro-USB adapter.
- 1x QR code manual.
- Warning:
- Do not connect the A1-SLWF-03 controller to your PC via USB if other power sources are connected (e.g., via screw terminal or DC jack).
- THE MICROPHONE WORKS IF THE CONTROLLER IS CONNECTED TO YOUR HOME WIFI NETWORK. IF THE CONTROLLER IS IN ACCESS POINT MODE, THE MICROPHONE WILL NOT FUNCTION.
