The compact wallbox can be used in fixed mode, at home or at work. Installation is simple, intuitive operation and comfort features intelligent. Single-phase or three-phase charging powers from 1.4 kW to 11 kW.
The charger is ideal for all drivers who want to charge their electric car in 1-/3-phase up to 11 kW. 1-/3-phase switching is conveniently done via smartphone using the free go-eCharger app, which can also be used to operate the charging station in the local Wi-Fi network without cloud, if desired.
Thanks to the integrated Type B differential circuit breaker, all you need is your go-e charger to be connected to the current and is immediately ready for use. The charging station has a 1.8 meter connection cable for permanent connection to a power distribution box. Thus, unlike the go-e Charger Gemini flex, the charger does not have a plug and is therefore not mobile. The clever solution for all those who need a smart home charging station for pure wall Installation.
The successor to the best wall charger according to ADAC, ÖAMTC and Stiftung Warentest
The successor to the test winner, the 11 kW go-eCharger HOMEfix, has a new successor, namely the go-e Charger Gemini. In terms of features, the latest wallbox from go-e is no different from the winner of the Wallbox Test 2022.
Plug & Play – start charging immediately
Attach the wall mount, hang the charger and connect it to a suitable power source. Once the charger has been plugged into your vehicle via a charging cable, the charging process will start (with default settings). Charging a car with go-e is as easy as charging a smartphone.
Compatible with all electric cars
The Gemini go-eCharger reliably charges all electric cars with a type 2 plug registered on the European market, regardless of the brand of the car. For example, Renault Zoe, Mercedes-Benz EQC, Nissan Leaf, Hyundai Ioniq, Kia Niro, eGolf, BMW i3 and all Tesla vehicles can be charged without any problems. The charging station is therefore absolutely compatible with all electric cars from all manufacturers.
Incredibly smart
Once installed by your electrician, the go-e charging station is ready to use. Those with a smart home system can integrate the device into the grid and have it communicate with other devices, which should be particularly interesting when it comes to solar systems and charge management since you will be able to automatically activate EV charging when solar energy is available. Thus, refueling the vehicle with energy will not cost you a penny.
WLAN and RFID access control
Thanks to its interfaces, the wallbox can also be integrated into the home network via WIFI or connected to the Internet via hotspot, in order to benefit from additional functions such as load management or various timer settings. You can create and manage up to 10 RFID accounts per charging station and teach 10 WLAN networks simultaneously. WLANs are displayed automatically and do not require manual registration. The RFID function makes it possible to customize access to the charging station so that no one can start charging without permission. With RFID, you can authorize, control and evaluate charges and even export them as a CSV file.
More economical and ecological control thanks to the timer
Thanks to a timer, starting and stopping can be set in advance with the day of the week as well as the time of the charging period. So you can charge your vehicle at night or in the early hours of the morning and save money with night rates. If you don't charge during rush hour, this also has an environmental benefit; This allows voltage peaks to be dampened and excess electricity can be used at night.
Communication to other devices through the API
The Gemini go-eCharger is a system with an open HTTP API interface. This allows them to be combined with devices from other manufacturers to offer real intelligence at the level of your electrical network. Integrate your go-e charger and solar panels with your home automation and you will have a solution that is extremely effective and efficient, not only to save costs, but also not to harm the environment.
In-app management
Whether you want to check your charging history, set the time window for charging, regulate the amperage, set up the device's adjustment knob, switch phases 1/3 or simply start and stop charging, the free app gives you full control. You can sync and view past charges using Cloud.
Weather resistant and protected against theft
Unimpressed by any weather conditions, the Gemini go-eCharger delivers full power at all times, protected by high-performance plastic. The charging cable can be locked to prevent theft. If installed outdoors, you can protect the wallbox from unauthorized use with an RFID chip. RFID chips are also useful if multiple people share the device. The charging current is shown separately for each user.
Security and protection of your equipment
Thanks to the extensive safety features of the go-eCharger Gemini, you can relax while the car is safely charged. The charging station reduces the current flow if necessary or turns off completely in case of fault current. In this way, the charger protects itself while protecting your car and the electrical system of your home.
Duties
- 11kW charging station with free app control for Android and IOS
- Connection to the type 2 vehicle side socket
- Amperage and charging status display via LED ring, push-button adjustable charging power and application.
- Residual Current (FI) circuit breaker with DC detection, 20 mA AC, 6 mA DC
- RFID access control, WLAN with up to 10 teachable networks at the same time
- Open API for integration with third-party systems.
SPECIFICATIONS
Maximum charging power
Configurable charging current
- 6 A to 16 A (1.4 kW – 3.7 kW – 7.4 kW – 11 kW)
- in 1 A steps via the app or
- in 5 steps by push button
Nominal voltage
- 230 V (single phase) / 400 V (three-phase)
- Single-phase/three-phase switching via app
Control, amperage and status display
- Button, application (local or global access point via WLAN),
- LED indication and application
Security
- Indoor and outdoor installation
- RCD protection module with DC detection
- Locking the charging cable
- RFID Access Control
Comfort and durability
- Electricity meter (log via app download)
- RFID chip management
- Planner
- Flexible electricity rates
- Eco mode / scheduled charging mode
- Static load balancing
- Photovoltaic connection via API
Mains connection
- 1.8 cable, 5 x 2.5 mm² 16 A (11 kW)
- Optional adapters for other sockets (not allowed in Switzerland)
Size
- Approx. 15.5 x 26 x 11 cm
Interfaces, communication protocols
- API HTTP (Local + Cloud), MQTT,
- OCPP 1.6, Modbus TCP, network operator API
Weight
