Trio2Sys - Modular 1-channel LED counting EnOcean receiver

Modular 1-channel LED receiver with EnOcean metering

The modular 1-channel switch receiver is used to receive radio signals from EnOcean switch transmitters or sensors.

Designed for switching LED and compact fluorescent lighting loads, it can also switch resistive loads (halogen), fluorescent tubes, low-voltage halogen lamps with ferromagnetic and electronic transformers, power contactors or small motors.

The 1-channel switch receiver is equipped with the "repeater" function as well as the "consumption indicator" function.

FUNCTIONS :

• 1-channel receiver module 1.5A
• EnOcean technology
• Remote control of lights/appliances
• ON/OFF function
• Supports any type of load
• Up to 32 transmitters can be assigned (switches, presence detectors, or magnetic window or door contacts)
• Zero Crossing technology
• Power consumption metering
• Repeater and status feedback functions
• DIN rail mounting
• Easy to install and use

 
TECHNICAL SPECIFICATIONS :

• Power supply : 230V~ / 50 Hz
• Power consumption : <0,35W (relay off)
• Output load:
• Resistive load : 1,5A/345VA max (Cos φ=1)
• LED: 345W
• Inductive: 800W with cosφ=0.4 to 0.6
• Halogen: 920W
• Compact fluorescent: 345W
• Measurement accuracy (power): 2% ± 1 digit (for powers <10W)
• EnOcean Equipment Profile: D2-01-00 (power consumption) / A5-3F-00 (radio test)
• Number of associable transmitters: Up to 32 transmitters and magnetic window contacts
• Dimensions: 17.5 mm x 97.4 mm x 66.4 mm (1 DIN rail slot)
• Operating temperature : -10 to +45°C
• Humidity: 0% to 75% relative humidity (non-condensing)
• Transmission frequency: 868.3MHz
• Range in buildings:
• Masonry: 20m, through up to 3 walls
• Reinforced concrete: 10m, through 1 wall/ceiling maximum
• Plasterboard / Wood: 30m, through up to 5 walls