Ajax - Wireless keypad and RFID badge reader (Ajax Keypad Plus)

KeyPad Plus is a wireless touch keyboard for indoor installation and allowing the management of the security system Ajax with contactless cards and protected key rings. It includes support for the "silent alarm" when entering the constraint code. THE LED lighting indicates the current safety mode.

Contactless management, without compromising on reliability

KeyPad Plus combines is a compendium of state-of-the-art encryption technology and advanced user experience, in a tool for secure and simplified system management. Arm and disarm Ajax, activate night mode and manage specific groups with a Pass card or Tag key ring.

State-of-the-art data protection system

To identify users quickly and securely, KeyPad Plus incorporates DESFire® technology. It is the best contactless solution to identify a user by card or keychain on the market.

DESFire® is based on the international standard ISO 14443 and combines global 128-bit encryption and copy protection. This technology is used for the transfer of European capital and for access to NASA systems.

Exceptional autonomy

The brand new firmware of the KeyPad Plus makes it possible to make optimal use of the pre-installed batteries. Even though the contactless identification feature is used daily, the keyboard can run for 3.5 years without the need to replace the batteries. And if the card and key ring reader is disabled, the battery life can reach 4.5 years. KeyPad Plus notifies the monitoring center and users in advance when batteries need to be replaced.

Remote Access Management

Set personal passcodes to find out who disarmed the system, and when it was disabled: the user name is displayed in the notification and in the event log. Pass and Tag can also be assigned to a specific user, and it is possible to limit system management permissions to specific groups, where they can be granted access to the entire site system. The Ajax app allows you to manage access permissions in real time. You can limit, extend, or block these permissions instantly.

Add users. Fast and simple.

Ajax systems support up to 200 Tags or²Passes. There is no need to create an account Ajax for new users, just give the device a name and set access permissions. This way it is easier to delegate access to system management to temporary or newly hired employees.

Safety mode indicator

KeyPad Plus has light and sound indicators that allow you to manage the state of the system without the application Ajax. The volume of the device and the brightness of the backlight are adjustable.

Multi-level anti-sabotage system

Tamper

Users and the monitoring center receive a notification when someone removes the keyboard from their support

Blocking in case of incorrect code

If 3 consecutive erroneous codes are entered, the keyboard is blocked and an alarm is triggered

authentication

If someone tries to use an invalid card or key ring, an alarm goes off

Polling intervals

The system detects a loss of connection with the keyboard in less than³ minutes

Transmission of silent alarms to a monitoring centre

If intruders force a user to disarm the system

The constraint code allows you to simulate system disarming via KeyPad Plus. The presence of the user does not trigger a siren, neither in the application nor via the keyboard, but an alarm is transmitted instantly to the monitoring center⁴.

Transmission of alarms guaranteed

We have developed the Jeweller radio protocol to ensure the uninterrupted operation of all devices in the system. The radio protocol uses time intervals to synchronize the communication of connected devices, authentication to eliminate counterfeits and encryption to protect against piracy.

Intelligent security system management interface

Use scenarios so that your daily procedures are handled automatically. When arming, the system turns off the lights, turns off the water supply, disables electrical appliances, closes the roller shutters, all with a single click on KeyPad Plus.

Simple installation

KeyPad Plus is connected and set up in the Ajax app. No need to disassemble the case or insert batteries. The device is added to the system through its QR code. All the technician needs to do is test the device, add cards, and manage access permissions.

Technical specifications

• Keyboard type: Capacitive touch keyboard
• Installation: Interior only
• Compatibility: Hub Plus, Hub 2, Hub 2 Plus, ReX with OS Malevich 2.11 and higher
• Personal access code: Yes
• Protection against bad passwords: Yes
• Constraint code: Yes
• Contactless access:
  • DESFire® EV1, EV2
  • ISO14443-А (13.56MHz)
• feeding:
  • Batteries: 4 lithium AA (FR6)
  • Voltage 1.5 V
  • Battery life: up to 4.5 years
• Temperature sensor: Available
• Jeweller Radio Technology
  • Communication range with the central unit — up to 1700 m
  • Two-way communication between devices
  • Operating frequencies — 868.0–868.6 MHz⁵
  • Self-adjustable RF output power — up to 20 mW
  • Block encryption with dynamic key
  • Ping interval — 12–300 seconds
• Tamper
  • authentication
  • Interference detection
  • Anti-sabotage alarm
• Operating temperature range: From –10°C to +40°C
• Operating humidity: Up to 75%
• Dimensions: 165 × 113 × 20 mm
• Weight: 267 g
• Certification: EN 50131, complies with the requirements of technical regulations governing radio equipment
• Warranty: 24 months

Complete kit

• KeyPad Plus
• SmartBracket mounting panel
• 4 AA batteries (pre-installed)
• Installation Kit
• User Manual

¹ Cards and key rings are sold separately

² Depending on the hub model: Hub 2 — up to 50 users, Hub Plus — up to 99, Hub 2 Plus — up to 200.

³ With hub — 12-second detector polling period

⁴ Provided that the security system is connected to a monitoring center. List of certified partners Ajax in your region: follow the link →

⁵ By region of marketing