With the Tuya Zigbee YAGO water quality monitor, you can monitor your pool's water quality in real time with various measurements: Chlorine (pH), TDS (ppm), EC (conductivity), CL (chlorine), ORP, SALT, and pool water temperature with more precision, speed, and stability.
This sensor must be paired with a compatible Zigbee home automation hub (Tuya, Jeedom, or Home Assistant with Zigbee2Mqtt) to be used.
Warning
- The water in the pool should be between 6.5 and 8ph and ORP between 487-840mv, and the chlorine value will be displayed normally. Chlorine will not be displayed if either value is out of range.
- If the pH value is below 6.5, it means that the water quality is too acidic and contains impurities, and it is necessary to add disinfectant water for disinfection.
- If the ORP value is above 850mv, it means that too much disinfectant has been added, and it is necessary to add water or change the water for neutralization.
- If the ORP value is below 487mv, it means that too little disinfectant has been added and the pool needs to be disinfected again.
FUNCTIONS
pH and salt tester for saltwater pools: The professional water quality tester greatly simplifies confirming the pH and salinity (ppm) levels in the pool when you start using the salt electrolyzer generator; it also works for weekly salt control to ensure proper chlorinator operation, balancing salt, chlorine, and pH. A great help for saltwater pools.
Free chlorine and pH tester: Recommends a pH of 7.2 to 7.8 pH and a free chlorine concentration of 1 to 3mg/L in pools; the pH and chlorine monitor can test both free chlorine and pH, ensuring both levels are in the optimal range for clear pool water.
Wireless Zigbee app control: Wireless connection. Once the pH and salinity tester is connected to your smartphone, open the Tuya app, and you can view pool data in real time anytime and anywhere (the app is free). The highest or lowest measurement value can be set according to the demand in the smart scene, and the detection result can be requested on the app when it is out of range, allowing you to disinfect the pool at the best time. The device must be used with a gateway.
7-in-1 multifunctional pool monitor: Monitors pH, ORP, salinity, chlorine, EC, TDS, and temperature values. Range: pH (0.0-14.0pH), salinity (0-9990ppm), ORP (-999 ~ + 999mV), CL (0.0-4.0mg/L), EC (0-9990μS/cm, 10.01-19.99 mS/cm, TDS (0-9990ppm), Temperature (32.0-122.0 ℉); Professional salt pH ORP CL tester for pool, above-ground pool, in-ground pool, inflatable pool, saltwater pool, chlorinated pool, spa, hot tub.
Other designs you need: Support for solar and USB charging (very convenient for outdoor pools); floating design, floats in the water; supports 2.4GHz WiFi connection; easy to calibrate in the app.
TECHNICAL SPECIFICATIONS
- pH Range: 0.0-14.0
- Resolution: 0.1ph
- Accuracy: ± 0.1ph
- CL Range: 0.0-4.0mg/L
- Resolution: 0.1mg/L
- Accuracy: ± 0.1mg/L
- Salt Range: 0-999ppm, 1000-9990ppm
- Resolution: 1ppm, 10ppm
- Accuracy: ± 2% F.S.
- EC Range: 0-2000us/cm, 2000-9990uS/cm, 10.01-19.9 mS/cm
- Resolution: 1uS/cm, 10uS/cm, 0.01 mS/CM
- Accuracy: ± 2% F.S.
- TDS Range: 0-999ppm, 1000-9990ppm
- Resolution: 1ppm, 10ppm
- Accuracy: ± 2% F.S.
- ORP Range: ± 999mv
- Resolution: 1mv
- Accuracy: 15mv
- Temperature Range: 0.0 ℃-50.0 ℃, 32.0 ℉-122.0 ℉
- Resolution: 0.1 ℃/0.1 ℉
- Accuracy: ± 0.5 ℃
- Battery: USB (Cable NOT INCLUDED) and solar powered
- Size: 21*16.5cm
- Compatibility: Tuya and Zigbee2Mqtt
- Calibration: PH: 4.00/7.00/10.01, ORP: 222mv (including calibration liquid)
All functions have been calibrated when the product is shipped, please use it directly.
