Wireless, battery-free temperature and humidity reading with the Modon EnOcean sensor
This module for indoor use is a wireless sensor – battery-free, compatible with EnOcean. Combined with a central home system, it allows the temperature of a room to be increased with precision by less than 0.2°C and provides a measurement range of 0°C to 40°C, as well as a humidity measurement range of 0 to 100% RH.
The sensor records the temperature every 100 seconds. If the temperature varies by more than 0.5°C with respect to the previous value, the new temperature is sent to the central home system. If there is no variation, the temperature is sent a minima every 15 minutes.
A CR1216 battery (not included) can be mounted as an option, for a 3-year sensor lifetime in total darkness.
Technical Specifications
- Power: Solar Panel
- Temperature Measurement Range: 0°C à 40°C (0.16°C Resolution) – Indoor Use
- Humidity Measurement Range: 0 à 100% RH - Indoor Use
- Double-Sided Adhesive (included) or Screws (not included) Wall Mounting
- Optional CR1216 Battery (not included) for use in dark areas (total darkness 3-year lifetime)
- Operating Temperature: 0°C to 40°C - Maximum Altitude : 2000 m
- Radio EnOcean® Protocol: 868.3 MHz – EEP: A5-02-05
- Range: 30 m indoors
- Dimensions: 80*26*18 mm
- 2-Year Guarantee
Standards
-
EN 301489-3: Vl.4.1; EN 61000-6-1: 2007
-
EN 300220-1: V2.4.1, EN 300220-2: V2.4.1
-
EN60950-1: 2006+All:2009
-
EN62479: 2010
- Use
- Temperature/Humidity/CO2 Monitoring
- Type
- Sensor
- Function
- Humidity
Temperature - Gateway compatibility
- eedomus+ - compatible via optional adapter
- Protocol
- EnOcean
Produits de marque NodOn
Accessories
Customers who bought this product also bought:
Sehr gutes Produkt
Der Sensor hat werte die mit anderen Messgeräten übereinstimmen.
Funktioniert auch ohne direkter Sonneneinstrahlung seit Wochen.
Die Sendeleistung reicht vom ersten Stock bis in den Keller ohne Probleme.
Very precise
Very precise measurements. Does not need much light to work. I have 8 sensors installed and only one sensor needs a battery. It's installed in a room without any window.
Climat de bureau agréable
Le capteur est connecté au logiciel Jeedom, qui fonctionne sur un Rasberry-Pi. L'installation a été facile et le capteur fonctionne parfaitement.
Capteur Temps
Bon produit après un étalonnage de la température cela fonctionne très bien.
Works fine with my gateway
This one works fine with my homee (http://hom.ee) gateway.
Easy opening of the sensor (which unfortunately is not documented on the included small manual- simply push the back-cover either left or right (holding the sensor horizontally) and you will be able to then turn the back-cover off with ease) and easy one-press inclusion.
The sensors regularly (every 10 minutes) reports temperature and humidity as accurately as my existing Everspring/Devolo Z-Wave sensors that unfortunately need battery replacement every 6-9 months.
This one is small and nearly invisible and has good signal strength (the ground floor and parts of the first floor of my house are fully covered, w/o the need for additional signal relay via plugs so far) and I will therefore use these sensors in my wet rooms and gradually replace my existing Z-Wave sensors with this product.
Main motivation factor: No more need to regular replace expensive CR123 batteries, as this works fine with small solar panels (tested it w/o CR1216 batteries so far) and less intrusive (especially less intrusive than the Everspring ST814, that has one advantage though: It shows the current values on its embedded display, which the NodOn only does via the Gateway). Will still need to test (probably with CR1216 batteries) in my basement that does not have as much light.