Watteco - Temperature sensor with 2 remote probes - LoRaWAN

The Remote Temperature - 2 probes sensor is used to remotely measure the temperature at two points in a boiler room, domestic hot water production, cooling tower or cold room. The sensors can be placed against the pipes (and insulated with insulating tape) or inserted in the immersion sleeve.

Data is transmitted on the public or private LoRaWAN® network either periodically or immediately in the event of an alert when the minimum or maximum temperature threshold is exceeded.

Installation and commissioning are quick and easy. The sensor is fitted with :

• a switch (ILS) used for activation or deactivation,
• light-emitting diodes (LEDs) to check configuration and pairing with the network.

Each sensor is identified by a QR code on the label and an NFC tag inside the box.

Powered by a 3.6V/3600mAh battery, the device will operate for 12 years, with one transmission every 2 hours.

By default, the sensor is configured to transmit in batch mode the temperature of probe 1 and probe 2 every hour, with a measurement every 10 minutes.

The battery voltage level is monitored and updated remotely every 7 days.

Main characteristics

APPLICATIONS

• Food industry: supervision of refrigeration installations in logistics centres and storage centres.
• Industrial processes: monitoring the temperature of equipment, water, air and gas pipes.
• Energy optimisation for buildings (residential, commercial): supervision of heating, ventilation and air conditioning installations.
• Indoor or outdoor environment.

BENEFITS AND FEATURES

• LoRaWAN®, Class A
• Easy to install and use
• 2 remote temperature sensors (NTC) - 2m cable - Ø 6mm
• Instantaneous temperature measurement
• Differential data compression
• 12-year battery life (data compression mode)
• IP55 RATED
• CERTIFICATION
• RED, RoHS