Presentation
The TZ56D-ZW5 switch enables you to switch the connected load, either manually as a conventional switch or remotely using wireless Z-Wave+ protocol.
It can be included in a Z-Wave network and then controlled via your Z-Wave box or your remote control. The switch is equipped with an LED indicator to easily locate it in a dark room.
The TZ56D-ZW5 switch has 2 control buttons. The left one controls the connected load, and includes/excludes the Z-Wave network switch. The right-hand button enables you to control other Z-Wave devices using the association controls (Groups 2 to 4). Each group gives you the possibility of combining up to 5 other devices and control them manually via the switch.
Important: This switch requires a neutral. A pattress box with a diameter of at least 66 mm and a minimum depth of 50 mm is recommended.
Features
- Remote control for lighting
- To be installed to replace an existing switch
- Adds a control point for a device or a scene
- ON/OFF function
- Supports associated commands (Group 1 for the left button, 2 to 4 for the right-hand button)
- Local control of the load via the left-hand button
- Control over remote load(s) via right-hand button
- Status LED
Technical Specifications
- Type of module: Z-Wave+ receiver
- Colour: White
- Power supply: 230 V 50 Hz
- Wiring: 3-wire, neutral required
- Maximum power: 6A (1380W)
- Load type: Resistive
- Frequency: 868.42 MHz
- Range: up to 30m
- Dimensions: 86 x 86 x 47 mm
- Display: Blue LED
