OMNIO - Switching actuator 4 channels REGS12/04

Presentation

The Omnio DIN rail mounted multi switching actuator 4-channels REGS12/04 is a device for switching electrical loads. Its four potential free outputs are able to be actuated from up to 50 Omnio radio transmitters. Each transmitter can be programmed with one out of twenty different functions such as switch, push-button, staircase lighting, step-switch (AW20), time controlled switch (AW23/24/25), toilet ventilation, window and sliding door control, different scenes and presence simulation. Bidirectional communication, EnOcean Equipment Profile (EEP) D2-01-13. ARCO ready (AWAG Remote Commissioning). In addition, this actuator can be used as repeater in case of range issues. Suitable as DIN rail mounted device in distributing cabinets. Width 4 TE.

Brief instruction

• Attach switching actuator according to schematic
• Turn the rotary switch HEX to 0
• Press LRN 2 seconds
• Repress LRN to increment the channel number. The channel appears on the 7-segment display SEG
• Press handheld or wall mounted transmitter twice and keep it close to the actuator. CLR lights up for a second, after that the transmitter is programmed • Program further transmitters
• To finish press CLR

fUNCTIONS

• Switch On and Off
• Staircase light function
• Sequential push-button • Step switch (AW20)
• Timer (AW23/24/25)
• Toilet fan function
• Window and sliding door surveillance
• Programmable scenes
• Presence simulation
• Repeater function
• EnOcean Equipment Profile (EEP) D2-01-13
• ARCO ready (AWAG Remote Commissioning) 

gENERAL

The Omnio actuators (receivers) are controlled by radio signals coming from the Omnio transmitters. Each transmitter is able to control an unlimited number of actuators. The radio transmitter can be manually programmed and deprogrammed to an actuator following a simple procedure. Via actuator each transmitter can be given a certain function and different parameters. With ARCO technology, all Omnio actuators can be configured completely by radio without manual access to the device. The powerful software E-Tool constitutes the key component for conveniently planning, configuring and documenting projects of any size right at your desk. 

PRODUCT DESCRIPTION

The Omnio DIN rail mounted multi switching actuator 4-channels REGS12/04 is a device for switching electrical loads. Its four potential free outputs are able to be controlled by up to 50 Omnio radio transmitters. Each transmitter can be programmed with one of over twenty different functions, for example switch on, switch off, central on/off, staircase light, sequential push-button, step-switch (AW20), timer (AW23/24/25), window and sliding door surveillance, toilet fan function, programmable scenes and presence simulation. Bidirectional communication, EEP D2-01- 13. ARCO ready (AWAG Remote Commissioning). Suitable for DIN rail mounting, width 4 TE.