Precise air management
The Aeotec aërQ is a small sensor that monitors crucial measurements of the indoor environment.
Temperature
Manage heating and cooling and keep your space perfectly tempered; the aërQ technology monitors and reports temperatures between -10°C and 65°C and with an accuracy of ± 1°C.
Humidity
Whether managing airflow in living spaces or steam in showers, aërQ technology measures the relative humidity of a space between 0% and 80% and with an accuracy of ± 3%.
Dew point
Comfort and dew point go hand in hand. Too low and the skin can become irritated. Too high and you won't cool off on a hot day. The aërQ technology measures the dew point of a space in the same range as it measures its relative humidity.
Mold
A compatible home automation controller can use aërQ technology to test for potential poor air quality and warn of the likelihood of mold spores forming.
Install it (almost) anywhere
Understanding and intelligence, wherever you need it. The aërQ temperature and humidity sensor is small. Really small. At 35 mm wide, it's only slightly larger than a button cell. It was designed this size to fit almost anywhere you need to measure temperature and humidity, and to analyze certain attributes of air health. Its accuracy and focus allow it to enhance the measurements your automation systems receive from other sensors, while its size allows multiple sensors to be discreetly installed in large rooms.
Measurement and Understanding
When synchronized with a compatible Z-Wave controller, you'll be able to monitor temperature, humidity and health in the room anytime, anywhere.
Measurement and automation
The aërQ temperature and humidity sensor is more than just information. Fully compatible Z-Wave controllers will allow you to leverage its measurements and analytics, using various data points and conclusions to enable powerful, intelligent automation.
Cool or heat a space to perfection. Automatically.
Set and automate the desired climate and activate connected ventilation, air conditioning, or heating when a space's temperature is deemed less than perfect.
Humidify a space when the air is too dry. Automatically.
Saunas should feel like saunas, deserts like deserts. Monitor the relative humidity of a room and automatically turn on connected humidifiers, dehumidifiers or exhaust fans.
Adjust airflow when air quality is poor. Yes, automatically.
Turn on fans and open windows automatically or reactively when the aërQ temperature and humidity sensor warns you of poor air quality and the risk of mold growth.
1 battery. 2-year life span.
One button cell battery continues to measure for years. With accuracy.
Designed in Germany around a single, inexpensive CR2477 button cell battery, the aërQ temperature and humidity sensor uses Gen7 and S2 ultra-low-power Z-Wave technologies to run for up to 2 years before needing to change its battery. And changing the battery is a breeze: simply separate the two pieces, recycle the existing battery and slide in a new one. The aërQ temperature and humidity sensor will be in place and measuring again in a few moments.
FUNCTIONS
- Measures temperature and humidity
- Measures dew point
- Indicates the risk of humidity
- Supports 6 association groups
- Up to 2 years of battery life
- Z-Wave Smart Start and S2 Security
- Wireless technology: Z-Wave Plus V2 (Z-Wave 700 / Gen7)
TECHNICAL SPECIFICATIONS
- Power supply: Battery CR2477 3V Lithium (LiMnO2)
- Battery life: with default setting up to 2 years
- Radio frequency: 868.42 MHz
- Operating distance: up to 150 meters outdoors / over 50 meters indoors
- Humidity range: 0 to 80% RH + - 3%.
- Temperature range: -10 to 65 ° C (+ - 1 ° C)
- Dew point range: -10 to 65 ° C (+ - 1 ° C)
- Operating Humidity: 10 to 95% (+ - 1 ° C)
- Operating temperature: 0°C to 45°C
- Storage temperature: -30 ° C to 70 ° C
- Dimensions: 35 x 35 x 18 mm
- Weight: 21g
